Motor, FAN MOTOR, Condenser, USED ON 90% of Display Coolers/Freezers

Description

Gregoriou Brothers Refrigeration Since 1979
Frosty-Freeze
Motor, FAN MOTOR, Condenser, USED ON 90% of Display Coolers/Freezers
Condensor  Fan Motor, 9 WATT, 115 VOLTS, 1550 RPM, CW ROTATION
SID# A20-38
UET Part# UEM 1091T
SAME AS FASCO MOTOR Part# D562 OR INDUSTRIAL REFRIGERATION# 5411
SHADED POLE
CW ROTATION
Volts: 115
HZ: 60
Wattage: 9
AMPS: .64
Rotation: CW
RPM: 1550
SHAFT: 1/4"-20tpi, THREADED SHAFT
TOTALLY ENCLOSED AIR OVER & THERMAL PROTECTED
This is the condenser fan motor used on 90% on the single to 3 door disply coolers and freezers,
The key things you need to know when replacing a condenser fan motor is;
The WATTS?
The ROTATION?
The Voltage or Volts?
This motor is,
9 Watts
The rotation is
"CW" or "Clock Wise" facing or look at the back of the motor. If you look at the Front of the motor, the rotation would be CCW or counter clockwise.
This motor's voltage is,
115 VAC & 0.55 AMPS Volts
Additional:
1550 RPM
Mounting: Base mounting on Top or Bottom or motor (4 holes each side)
Back mounting, 3 holes
Shaft: 1/4 threaded with fan blade gasket, retaining washer and nut.
Mounting screws included.
$Condensor Fan Motor, 9 WATT, 115 VOLTS, 1550 RPM, CW ROTATION SID# A20-38 UET Part# UEM 1091T SAME AS FASCO MOTOR Part# D562 OR INDUSTRIAL REFRIGERATION# 5411 SHADED POLE CW ROTATION Volts: 115 HZ: 60 Wattage: 9 AMPS: .64 Rotation: CW RPM: 1550 SHAFT: 1/4"-20tpi, THREADED SHAFT TOTALLY ENCLOSED AIR OVER & THERMAL PROTECTED This is the condenser fan motor used on 90% on the single to 3 door disply coolers and freezers, The key things you need to know when replacing a condenser fan motor is; The WATTS? The ROTATION? The Voltage or Volts? This motor is, 9 Watts The rotation is "CW" or "Clock Wise" facing or look at the back of the motor. If you look at the Front of the motor, the rotation would be CCW or counter clockwise. This motor's voltage is, 115 VAC & 0.55 AMPS Volts Additional: 1550 RPM Mounting: Base mounting on Top or Bottom or motor (4 holes each side) Back mounting, 3 holes Shaft: 1/4 threaded with fan blade gasket, retaining washer and nut. Mounting screws included.
Gregoriou Brothers Refrigeration Since 1979
Frosty-Freeze
Motor, FAN MOTOR, Condenser, USED ON 90% of Display Coolers/Freezers
Condensor  Fan Motor, 9 WATT, 115 VOLTS, 1550 RPM, CW ROTATION
SID# A20-38
UET Part# UEM 1091T
SAME AS FASCO MOTOR Part# D562 OR INDUSTRIAL REFRIGERATION# 5411
SHADED POLE
CW ROTATION
Volts: 115
HZ: 60
Wattage: 9
AMPS: .64
Rotation: CW
RPM: 1550
SHAFT: 1/4"-20tpi, THREADED SHAFT
TOTALLY ENCLOSED AIR OVER & THERMAL PROTECTED
This is the condenser fan motor used on 90% on the single to 3 door disply coolers and freezers,
The key things you need to know when replacing a condenser fan motor is;
The WATTS?
The ROTATION?
The Voltage or Volts?
This motor is,
9 Watts
The rotation is
"CW" or "Clock Wise" facing or look at the back of the motor. If you look at the Front of the motor, the rotation would be CCW or counter clockwise.
This motor's voltage is,
115 VAC & 0.55 AMPS Volts
Additional:
1550 RPM
Mounting: Base mounting on Top or Bottom or motor (4 holes each side)
Back mounting, 3 holes
Shaft: 1/4 threaded with fan blade gasket, retaining washer and nut.
Mounting screws included.
Condensor  Fan Motor, 9 WATT, 115 VOLTS, 1550 RPM, CW ROTATION
SID# A20-38
UET Part# UEM 1091T
SAME AS FASCO MOTOR Part# D562 OR INDUSTRIAL REFRIGERATION# 5411
SHADED POLE
CW ROTATION
Volts: 115
HZ: 60
Wattage: 9
AMPS: .64
Rotation: CW
RPM: 1550
SHAFT: 1/4"-20tpi, THREADED SHAFT
TOTALLY ENCLOSED AIR OVER & THERMAL PROTECTED
This is the condenser fan motor used on 90% on the single to 3 door disply coolers and freezers,
The key things you need to know when replacing a condenser fan motor is;
The WATTS?
The ROTATION?
The Voltage or Volts?
This motor is,
9 Watts
The rotation is
"CW" or "Clock Wise" facing or look at the back of the motor. If you look at the Front of the motor, the rotation would be CCW or counter clockwise.
This motor's voltage is,
115 VAC & 0.55 AMPS Volts
Additional:
1550 RPM
Mounting: Base mounting on Top or Bottom or motor (4 holes each side)
Back mounting, 3 holes
Shaft: 1/4 threaded with fan blade gasket, retaining washer and nut.
Mounting screws included.